Lindab Rainline metal galvanised pipes and fittings
Pipes
Downpipe
-
Roll formed 0.6mm steel with solid seam (0.7mm for 120mm pipes)
-
Hidden male/female joint, sockets are not required
-
Supplied in 3m lengths as standard
-
Also available in 2.5m or 1m shorter lengths
| Size mm | Di mm | d mm |
| 75 | 75 | 73 |
| 87 | 87 | 85 |
| 100 | 100 | 98 |
| 120 | 120 | 118 |
SROR – Downpipe
Rod Access Pipe
-
Used to provide access for maintenance rod to remove pipe blockages
-
Supplied in 1m length with double spigot male ends
-
Second spigot can be removed if not required
-
Steel door can be unlocked and removed using plastics handles
MSTRA – Rod Access Pipe
Intermediate Pipe 1m / 0.5m
-
Typically used to make an offset with >100mm projection
-
1m length option supplied with double spigot male ends
-
Can be cut to make two short pipes
-
0.5m supplied with male/female ends
| Size mm | Di mm | d mm |
| 75 | 75 | 73 |
| 87 | 87 | 85 |
MST – Intermediate Pipe 1m / 0.5m
Sliding Pipe
-
Used with an RT Drain Trap
-
Provides easy access for cleaning
-
Fits outside the down pipe
| Size mm | D mm |
| 75 | 77 |
| 87 | 89 |
| 100 | 102 |
PRT – Sliding Pipe
Pipe brackets
Used for fixing pipes to the wall
• Recommended maximum 1.5m interval spacing
Universal Pipe Bracket
-
Can be used to screw fix pipes to the wall or used with SST Spike for drive-in fixing
-
Easy click function secures pipe in place
-
Required 2 screws or spike for fixing
| Size mm | D mm |
| 75 | 77 |
| 87 | 89 |
| 100 | 102 |
| 120 | 122 |
SSVU – Universal Pipe Bracket
Pipe Holder (for Spike)
-
Required for unpainted systems
-
Used to attach pipe to spike fixed into the wall
-
Wedge is used to secure pipe into place
-
When pipe holder is closed the spike locks in place
-
Spike is ordered separately
| Size mm | L mm |
| 75 | 77 |
| 87 | 89 |
| 100 | 102 |
| 120 | 122 |
SV – Pipe Holder (for Spike)
Down Pipe Bracket
-
Required for unpainted systems
-
Used to screw fix pipes to the wall
-
Wedge is used to secure pipe into place
-
Requires 2 screws for fixing
| Size mm | D mm |
| 75 | 77 |
| 87 | 89 |
| 100 | 102 |
| 120 | 122 |
SVHA – Down Pipe Bracket
Spike (for Pipe Holder)
-
Used with pipe holder to fix pipe to the wall
-
Spike is ordered separately, supplied in plain galvanised finish only
-
Available in 125mm, 175mm, 250mm and 300mm lengths
-
When pipe holder is closed the spike locks in place
| Size mm | L mm |
| 125 | 125 |
| 175 | 175 |
| 250 | 250 |
| 300 | 300 |
SST – Spike (for Pipe Holder)
Hoppers
Regular Water Hopper
-
Used at the head of a pipe that doesn’t directly connect to a gutter
-
Rectangular front with square sides
-
250 x 150 x 150mm
VATKR – Regular Water Hopper
Large Water Hopper
-
Used with high flow outlet spouts or where multiple gutters meet
-
Square top with inverted pyramid sides
VATKL – Large Water Hopper
Bends
Used for offsetting pipe stacks and traversing facade features
Conical pipe bend
-
Conical shape provides clean line while allowing male/female connection
-
Top is perfect fit for outlets or male spigot ends of pipes
-
Bottom fits directly into standard pipe
-
Available in 45°, 70° and 85° variations
| Size mm | Di mm | d mm |
| 75 | 75 | 73 |
| 87 | 87 | 85 |
| 100 | 100 | 98 |
| 120 | 120 | 118 |
BK – Conical pipe bend
Pipe bend with socket
-
Traditional socket allows male/female connectio
-
Top will fit directly to a cut end of a standard pipe
-
Bottom fits directly into standard pipe
-
Available in 45°, 70° and 85° variations
| Size mm | Di mm | d mm |
| 75 | 77 | 75 |
| 87 | 89 | 87 |
| 100 | 102 | 100 |
| 120 | 122 | 100 |
BM – Pipe bend with socket
One-Piece Offset
-
Used to offset a pipe stack usually to join to a gutter outlet or to traverse a plinth
-
Set 100mm projection
-
Longer offsets can be assembled using bends and cut down pipes
| Size mm | Di mm | d mm |
| 75 | 77 | 75 |
| 87 | 89 | 87 |
| 100 | 102 | 100 |
| 120 | 122 | 120 |
SOKN – One-Piece Offset
Shoes
Pipe Shoe
-
Angled pipe shoe used to discharge water into a drain or grate
-
Socket fits directly to pipe
-
Rolled rim ensures no sharp edges
| Size mm | Di mm | d mm |
| 75 | 110 | 151 |
| 87 | 110 | 157 |
| 100 | 110 | 113 |
| 120 | 110 | 173 |
UTK – Pipe Shoe
Drain Shoe
-
Used to connect a pipe directly to a ground drain pipe
-
Fits outside the down pipe
-
Cover sits over drain pipe
-
Can be lifted to provide maintenance access
| Size mm | D1 mm | D2 mm |
| 75 | 81 | 115 |
| 87 | 93 | 115 |
| 100 | 93 | 115 |
| 110 | 93 | 119 |
| 120 | 93 | 119 |
BUTK – Drain Shoe
Drain Trap (HD Polythene)
-
Used to prevent leaves and other blockages entering the drain
-
Connects to 100mm drain pipe
-
Should be used with PRT sliding pipe to allow cleaning
RT – Drain Trap (HD Polythene)
Self Cleaning Leaf Trap (HD Polythene)
-
Used to filter leaves and other blockages from the drain pipe
-
Angled design allows rainwater to clean the filter
-
Connects to 100mm drain pipe
-
Can be used with a BUTK Drain Shoe to fit 75mm or 87mm pipes
SLS – Self Cleaning Leaf Trap (HD Polythene)
Connectors
Branch
-
Used to merge a second pipe run into a pipe stack
-
Branch can be positioned between 50 and 80
-
Standard branch will connect equal pipe diameters
-
Unequal branches are available which will fit pipes with smaller diameters
GROR – Branch
Pipe Connector
- Used to connect two pipes if the male spigot has been removed
- Allows pipe offcuts to be used
- Provides male/female connection
| Size mm | D mm | d mm |
| 75 | 77 | 73 |
| 87 | 89 | 85 |
| 100 | 102 | 98 |
| 120 | 122 | 118 |
SRORM – Pipe Connector
Drain Connector (HD Polythene)
-
Used to directly connect to a ground drain pipe
-
Stepped design fits to multiple sizes
-
Fits up to 100mm down pipes and drain pipes
MRT – Drain Connector (HD Polythene)
Pipe Connector
- Used to connect two pipes if the male spigot has been removed
- Allows pipe offcuts to be used
- Provides male/female connection
SRORM – Pipe Connector
Hose Connector
-
Used to connect pipe directly to a hose
-
Only available in 87mm
-
Fits to 80mm hose
SLAS – Hose Connector
Diverters
Adjustable Diverter
-
Outlet spout manually opens and closes
-
Spout attached with stainless steel rivets
-
Fits directly to pipe stack
FUTK – Adjustable Diverter
Rainwater Diverter Kit (HD Polythene)
-
Plastic components divert water through flexible hose
-
2 screw holes for wall fixing
-
Fits to 75mm or 87mm pipe stacks
RWDK – Rainwater Diverter Kit (HD Polythene)
Contact us
Get in touch for an obligation free quote to see what a difference the Lindab Rainline rainwater guttering system can make to your home.
Features and Benefits of Lindab Rainline
The sustainable choice
Tests have proven that steel has the lowest carbon footprint of any rainwater system. Manufactured from up to 30% recycled material, having an expected useful life of up to 70 years, and being completely recyclable means that the lifespan environmental impact of steel is much less than plastics and other metals.
Looks that last
Stylish design available in a choice of 10 painted colours and unpainted Magestic galvanised steel or natural copper finishes. Painted steel has a thick layer of zinc coating on both sides of the steel core to protect from corrosion. High-build, scratch-resistant polyester paint is UV stable and has excellent colour fastness. Unpainted materials have a natural finish which age beautifully.
Low maintenance
To ensure a long service life, the only maintenance that is required is an annual wipe or wash. Plastic can shrink and move when exposed to changing temperatures which can cause cracks and leaks, steel has low thermal movement minimising repair requirements. Vandal resistant products can be selected to further reinforce pipes from potential damage.
Find out more about Lindab Rainline – visit the website.
This steel has a thick layer of zinc coating on both sides which protects the steel core from corrosion and the top coat contains polymer grains that make the surface scratch resistant. This coating also has excellent flexibility which enables the sheet steel to be formed to produce guttering and downpipes plus other various products without damage to the coating.
An extra-durable high-build polyester paint coating provides protection and extends the life expectancy of Rainline in excess of 70 years with minimal maintenance, only annual cleaning is recommended and touch up of any scratched paint.
Rainline painted finishes have excellent colour fastness, they are UV stable. All painted Rainline is supplied with a standard 15 year warranty.
Colours displayed may vary from actual, NCS and RAL codes are the nearest colour match.
Colour samples can be supplied to demonstrate true colour.