Lindab Rainline Brackets

Products
Get in touchServices provided

Fascia brackets

• Recommended maximum 800mm interval spacing
• Should be installed to create fall of 10mm per 3.0m run

Lindab Rainline products - KFK Fascia Bracket MG

Fascia Bracket

  • Most popular fascia bracket for UK installations

  • Solid 5mm steel structure

  • 1 standard screw hole and 1 oval hole

KFK – Fascia Bracket

Lindab Rainline products - KPK Lightweight Fascia Bracket MG

Lightweight Fascia Bracket

  • Folded steel lightweight design

  • Reduced metal content

  • More environmentally friendly

  • 4 oval fixing holes to allow precise fixing adjustments

KPK – Lightweight Fascia Bracket

Lindab Rainline products - K24 240mm Flex Fit Fascia Bracket GV

240mm Flex-Fit Fascia Bracket

  • Extended 240mm bracket for larger gutters

  • Uses flexible clips to hold the gutter in place

  • 4 screw holes offer more secure fixing

Size mm 

L mm
190 244

K24 – 240mm Flex-Fit Fascia Bracket

Lindab Rainline products - SKK Adjustable Fascia Bracket MG

Adjustable Fascia Bracket

  • For use on angled fascia boards

  • Locks in place at 7°, 14°, 18°, 22°, 27°, 38° or 45° angle

  • Now with fixed hook front

  • Requires 1 fixing screw per bracket

SSK – Adjustable Fascia Bracket

Lindab Rainline products - K07 70mm Flex-Fit Fascia Bracket MG

70mm Flex-Fit Fascia Bracket

  • 70mm bracket with 2 screw holes

  • Uses flexible clips to hold the gutter in place

  • Clips attached with stainless steel rivets

Size mm

L mm

100

70

125

70

150

70

190

70

K07 – 70mm Flex-Fit Fascia Bracket

Rafter brackets

Used for securing gutters by fixing to roof rafters
• Recommended maximum 800mm interval spacing
• Should be installed to create fall of 10mm per 3.0m run
• Should be bent to required angle using KBO bracket bender

Lindab Rainline products - KFL 200mm Rafter Bracket MG

200mm Rafter Bracket

  • Most popular bracket for UK installations

  • Solid 5mm steel, 25mm wide rafter bar with 4 fixing holes

  • Can be supplied bent or twisted for side fixing for additional charge

Size mm L mm

100

196
125 196
150 196

KFL – 200mm Rafter Bracket

Lindab Rainline products - KFL 200mm Rafter Bracket MG

150mm Rafter Bracket

  • Shorter rafter bar is preferred for refurbishment installations

  • Solid 5mm steel, 25mm wide rafter bar with 4 fixing holes

  • Can be supplied bent or twisted for side fixing for additional charge

Size mm L mm
125 146
150 146

KFM – 150mm Rafter Bracket

Lindab Rainline products - KFL 200mm Rafter Bracket MG

350mm Rafter Bracket

  • Longer rafter bar can provide more secure fixing

  • Solid 5mm steel, 25mm wide rafter bar with 4 fixing holes

  • Can be supplied bent or twisted for side fixing for additional charge

Size mm L mm
125 336
150 336

KFL35 – 350mm Rafter Bracket

Flex-fit rafter brackets

Used for securing gutters by fixing to roof rafters
• Recommended maximum 800mm interval spacing
• Should be installed to create fall of 10mm per 3.0m run
• Should be bent to required angle using KBO bracket bender

Lindab Rainline products - K18 180mm Flex Fit Rafter Bracket MG

160mm Flex-Fit Rafter Bracket

  • Uses flexible clips, attached with stainless steel rivets, to hold the gutter in place

  • Solid 5mm, steel 25mm wide rafter bar with 4 fixing holes

  • Can be supplied bent or twisted for side fixing for additional charge

Size mm L mm
100 160
125 160
150 160

K16 – 160mm Flex-Fit Rafter Bracket

Lindab Rainline products - K18 180mm Flex Fit Rafter Bracket MG

210mm Flex-Fit Rafter Bracket

  • Uses flexible clips, attached with stainless steel rivets, to hold the gutter in place

  • Solid 5mm, steel 25mm wide rafter bar with 4 fixing hole

  • Can be supplied bent or twisted for side fixing for additional charge

Size mm L mm
125 210
150 210

K21 – 210mm Flex-Fit Rafter Bracket

Lindab Rainline products - K33 330mm Flex Fit Rafter Bracket MG

330mm Flex-Fit Rafter Bracket

  • Uses flexible clips, attached with stainless steel rivets, to hold the gutter in place

  • Solid 6mm, steel 30mm wide rafter bar with 4 fixing holes

  • Can be supplied bent or twisted for side fixing for additional charge

Size mm L mm
150 334
190 334

K33 – 330mm Flex-Fit Rafter Bracket

Rise & fall brackets

Used for securing gutters by driving into the wall
• Recommended maximum 800mm interval spacing
• Should be installed to create fall of 10mm per 3.0m run
Lindab Rainline products - RFKF Rise and Fall Bracket MG

Rise & Fall Bracket

  • Solid 5mm steel bracket with fixing nut

  • 250mm threaded bar used to adjust gutter level

  • 300mm spike used for drive in fixing to wall

  • Threaded bar and spike require paint after installation

    RFKF – Rise & Fall Bracket

Radius gutter brackets

Used for fixing gutter sections to fit a curved roofline
Lindab Rainline products - RSKR Radius Gutter Bracket MG

Radius Gutter Bracket

Guidance document available on request

  • Combined gutter joint and fascia bracket
  • 4° alignment deviation tolerance at each joint
  • Requires 2 fixing screws per bracket
  • Built in EPDM rubber gasket

RSKR – Radius Gutter Bracket

Contact us

Get in touch for an obligation free quote to see what a difference the Lindab Rainline rainwater guttering system can make to your home.

Features and Benefits of Lindab Rainline

The sustainable choice

Tests have proven that steel has the lowest carbon footprint of any rainwater system. Manufactured from up to 30% recycled material, having an expected useful life of up to 70 years, and being completely recyclable means that the lifespan environmental impact of steel is much less than plastics and other metals.

Looks that last

Stylish design available in a choice of 10 painted colours and unpainted Magestic galvanised steel or natural copper finishes. Painted steel has a thick layer of zinc coating on both sides of the steel core to protect from corrosion. High-build, scratch-resistant polyester paint is UV stable and has excellent colour fastness. Unpainted materials have a natural finish which age beautifully.

Low maintenance

To ensure a long service life, the only maintenance that is required is an annual wipe or wash. Plastic can shrink and move when exposed to changing temperatures which can cause cracks and leaks, steel has low thermal movement minimising repair requirements. Vandal resistant products can be selected to further reinforce pipes from potential damage.

Find out more about Lindab Rainline – visit the website.

Lindab Rainline gutter diagram

This steel has a thick layer of zinc coating on both sides which protects the steel core from corrosion and the top coat contains polymer grains that make the surface scratch resistant. This coating also has excellent flexibility which enables the sheet steel to be formed to produce guttering and downpipes plus other various products without damage to the coating.

An extra-durable high-build polyester paint coating provides protection and extends the life expectancy of Rainline in excess of 70 years with minimal maintenance, only annual cleaning is recommended and touch up of any scratched paint.

Rainline painted finishes have excellent colour fastness, they are UV stable. All painted Rainline is supplied with a standard 15 year warranty.

Colours displayed may vary from actual, NCS and RAL codes are the nearest colour match.
Colour samples can be supplied to demonstrate true colour.